GIGABYTE Z490-UD LGA1200 DDR4 M.2 HDMI ATX

Intel Z490 Ultra Durable Motherboard with Direct 11+1 Phases Digital VRM, Extended MOS Heatsink, Dual NVMe PCIe 3.0 x4 M.2, GbE Gaming LAN, Integrated I/O Shield, Q-Flash PLUS, RGB FUSION 2.0

Features:
-Intel Optane Memory Ready
-Dual Ultra-Fast M.2 with PCIe Gen3 X4 & One Supports SATA protocol
-RGB FUSION 2.0 Support Addressable LED & RGB LED Strips
-Rear IO Armor with Pre-Installed I/O Shield

Specifications:
-Chipset: Intel Z490 Express Chipset
-LAN: Realtek GbE LAN chip (1000 Mbit/100 Mbit)
-Multi-Graphics Technology:

Support for AMD Quad-GPU CrossFire and 2-Way AMD CrossFire technologies
-I/O Controller: iTE I/O Controller Chip
-Operating System: Support for Windows 10 64bit
-Form Factor: ATX Form Factor

CPU:
-Support for 10th Gen Intel Core i9/i7/i5/i3/Pentium/Celeron processors
-L3 cache varies with CPU

Memory:
Intel® Core™ i9/i7 processors:
-Support for DDR4 4500(O.C.)/4400(O.C.)/4300(O.C.)/4266(O.C.)/4133(O.C.)/4000(O.C.)/3866(O.C.) /3800(O.C.)/3733(O.C.)/3666(O.C.)/3600(O.C.)/3466(O.C.)/3400(O.C.)/3333(O.C.)/3300(O.C.)/3200(O.C.) /3000(O.C.)/2933/2800/2666/2400/2133 MHz memory modules

Intel Core i5/i3/Pentium/Celeron processors:
-Support for DDR4 2666/2400/2133 MHz memory modules

-4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
-Dual channel memory architecture
-Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
-Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
-Support for Extreme Memory Profile (XMP) memory modules

Onboard Graphics:
-Maximum shared memory of 512 MB

Integrated Graphics Processor-Intel HD Graphics support:
-1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz

Auido:
-Realtek® ALC887 codec
-High Definition Audio
-2/4/5.1/7.1-channel
-Support for S/PDIF Out

Expansion Slots:
-1 x PCI Express x16 slot, running at x16 (PCIEX16)
-1 x PCI Express x16 slot, running at x4 (PCIEX4)
-3 x PCI Express x1 slots

Storgae Interface:
-1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4/x2 SSD support) (M2A_SB)
-1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 PCIe x4/x2 SSD support) (M2M_SB)
-6 x SATA 6Gb/s connectors
-Support for RAID 0, RAID 1, RAID 5, and RAID 10
-Intel® Optane™ Memory Ready

USB:
-1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
-7 x USB 3.2 Gen 1 ports (5 ports on the back panel, 2 ports available through the internal USB header)
-4 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports available through the internal USB header)

Internal I/O Connectors:
-1 x 24-pin ATX main power connector
-1 x 4-pin ATX 12V power connector
-1 x 8-pin ATX 12V power connector
-1 x CPU fan header
-4 x system fan headers
-2 x addressable LED strip headers
-2 x RGB LED strip headers
-1 x Q-Flash Plus button
-6 x SATA 6Gb/s connectors
-2 x M.2 Socket 3 connectors
-1 x front panel header
-1 x front panel audio header
-1 x S/PDIF Out header
-1 x USB 3.2 Gen 1 header
-1 x USB 2.0/1.1 header
-1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
-2 x Thunderbolt™ add-in card connectors
-1 x serial port header
-1 x Clear CMOS jumper

Back Panel Connectors:
-1 x PS/2 keyboard/mouse port
-1 x HDMI port
-1 x USB 3.2 Gen 2 Type-A port (red)
-5 x USB 3.2 Gen 1 ports
-2 x USB 2.0/1.1 ports
-1 x RJ-45 port
-3 x audio jacks

BIOS:
-1 x 256 Mbit flash
-Use of licensed AMI UEFI BIOS
-PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0