Specification
GIGABYTE H110N Mini ITX Motherboard
Features:
Supports 6th Generation Intel® Core Processor
Dual Channel DDR4, 2 DIMMs
PCIe Gen2 x4 M.2 Connector with up to 20Gb/s Data Transfer (PCIe NVMe & SATA SSD support)
M.2 Socket 1 slot for wireless networking card
8-channel HD Audio with High Quality Audio Capacitors
Audio Noise Guard with LED Trace Path Lighting
HDMI 1.4, DVI-D, D-sub ports for multiple display
Realtek® GbE LAN with cFosSpeed Internet Accelerator Software
All new GIGABYTE APP Center, simple and easy use
Support Intel® Small Business Basics
Specifications:
CPU:
Support for 7/6th Generation Intel Core i7/5/3/Pentium/Celeron Processors
L3 cache varies with CPU
Chipset: Intel H110 Express Chipset
Memory:
2 x DDR4 DIMM sockets supporting up to 32GB of system memory
Dual channel memory architecture
Support for DDR4 2400/2133MHz memory modules
Support for ECC UDIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
Support for non-ECC UDIMM 1Rx8/2Rx8/1Rx16 memory modules
Onboard Graphics Integrated Graphics Processor - Intel HD Graphics support:
1 x D-Sub port, supporting a maximum resolution of 1920x1200@60Hz
1 x DVI-D port, supporting a maximum resolution of 1920x1200@60Hz
1 x HDMI port, supporting a maximum resolution of 4096x2160@24Hz
Support for HDMI 1.4 version
Support for up to 2 displays at the same time
Maximum shared memory of 1024MB
Audio:
Realtek ALC887 codec
High Definition Audio
2/4/5.1/7.1-channel
Support for S/PDIF Out
LAN: Realtek GbE LAN chip (10/100/1000 Mbit)
Expansion Slots:
1 x PCI Express x16 slot, running at x16 (The PCIEX16 slot conforms to PCI Express 3.0 standard)
1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)
Storage Interface:
1 x M.2 connector on the back of the motherboard (Socket 3, M key, type 2260/2280 SATA and PCIe x4/2/1 SSD support)
3 x SATA 6Gbps connectors
USB:
4 x USB3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
2 x USB2.0/1.1 ports (available through the internal USB header)
Chipset+GENESYS LOGIC USB2.0 Hub: 4 x USB2.0/1.1 ports on the back panel
Internal I/O Connectors:
1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector
1 x M.2 Socket 3 connector
3 x SATA 6Gbps connectors
1 x CPU fan header
1 x system fan header
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
1 x USB3.0/2.0 header
1 x USB2.0/1.1 header
1 x Trusted Platform Module (TPM) header
1 x speaker header
1 x serial port header
1 x Clear CMOS jumper
1 x chassis intrusion header
Back Panel Connectors:
1 x PS/2 keyboard/mouse port
1 x D-Sub port
1 x DVI-D port
1 x HDMI port
2 x Wi-Fi antenna connector holes
2 x USB3.0/2.0 ports
4 x USB2.0/1.1 ports
1 x RJ-45 port
3 x audio jacks (Line I/O, Mic In)
I/O Controller: iTE I/O Controller Chip
H/W Monitoring:
System voltage detection
System temperature detection
System fan speed detection
System overheating warning
System fan fail warning
System fan speed control
BIOS:
1 x 64Mbit flash
Use of licensed AMI UEFI BIOS
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Operating System:
Windows 10 64bit (7th Generation Intel Processors)
Windows 10/8.1 64bit & 7 32/64bit (6th Generation Intel Processors)
Form Factor: Mini-ITX Form Factor; 17.0cm x 17.0cm